More Power Tuning X2 9400 Downloads

SCT LIVE UPDATE 2 Version 2.2.0

IMPORTANT READ THIS: LIVE Update is the software used to update the firmware of X2's and SF 9415's.
NOTE: THE ONLY REASON TO UPDATE YOUR FIRMWARE IS IF YOU ARE RECEIVING AN ERROR OR ARE TOLD TO DO SO.

Directions: With the X2/SF Unplugged and your Vehicle Returned to Stock. Download and Install this program. The Drivers will install automatically. Once installed, save the firmware listed below that applies to your X2/SF Device, note the location that you are saving the file. Once saved, click on Start, All Programs, SCT, Live Update 2. This will open the software, you can now plug in the X2/SF. Click on the Browse button and navigate to the location that you saved the Tune Revision Update. Highlight it, click open, then click OK when you are returned to the LIVE Update screen. This will begin to transfer all of the update files. VERY IMPORTANT! Do not unplug or move the X2/SF while the files are being transferred.

NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.


	SCT LIVE LOAD 3 IMPORTANT READ THIS: Live Load software is the used for: To load Custom Email Tunes, To Change the Status of a Tuner from Stock to Unused. (aka Unlock) To Convert a 9415 from to a 9400 To Erase Existing Tunes To Format the X2 Directions: With the X2/SF Unplugged and your Vehicle Returned to Stock. Download and Install this program. The Drivers will install automatically. Once Installed, click on Start, All Programs, SCT, Live Load. This will open the software, you can now plug in the tuner. To Convert the SF 9415 to a 9400, click on the Erase Device button, then click on Erase Files. (Not Reversable) You can use browse button to locate and load custom tunes. VERY IMPORTANT! Do not unplug or move the X2/SF while the files are being transferred. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.

	SCT LIVE UPDATE 2 Version 2.2.0 IMPORTANT READ THIS: LIVE Update is the software used to update the firmware of X2's and SF 9415's. NOTE: THE ONLY REASON TO UPDATE YOUR FIRMWARE IS IF YOU ARE RECEIVING AN ERROR OR ARE TOLD TO DO SO. Directions: With the X2/SF Unplugged and your Vehicle Returned to Stock. Download and Install this program. The Drivers will install automatically. Once installed, save the firmware listed below that applies to your X2/SF Device, note the location that you are saving the file. Once saved, click on Start, All Programs, SCT, Live Update 2. This will open the software, you can now plug in the X2/SF. Click on the Browse button and navigate to the location that you saved the Tune Revision Update. Highlight it, click open, then click OK when you are returned to the LIVE Update screen. This will begin to transfer all of the update files. VERY IMPORTANT! Do not unplug or move the X2/SF while the files are being transferred. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.


	X2 and SF 9415 Firmware Version 1.14 IMPORTANT READ THIS: This is the most common firmware for the X2 9400's, and the SF 9415s. NOTE: THE ONLY REASON TO UPDATE YOUR FIRMWARE IS IF YOU ARE RECEIVING AN ERROR OR ARE TOLD TO DO SO. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.

	X2 and SF 9415 Firmware Version 1.15 IMPORTANT READ THIS: This is the current firmware for the X2 9400's, and the SF 9415s. Currently it is a known issue that 2007 and up F150's need to have this firmware in order to install a tune file. NOTE: THE ONLY REASON TO UPDATE YOUR FIRMWARE IS IF YOU ARE RECEIVING AN ERROR OR ARE TOLD TO DO SO. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.


	X2's are Custom Tune Only - Contact Me, or Order One Online.