More Power Tuning X3 3000 Downloads

SCT X3/Livewire Updater

IMPORTANT READ THIS: X3/Livewire Updater is the software used to do the following:

Update the firmware on the X3/SF3/Livewire,

Update the tune revision on the X3/SF3/Livewire,

Load Custom Tunes onto the X3/SF3/Livewire,
To Save a copy of the Stock File to your computer.
To Load a Recovery Stock File onto the X3/SF3/Livewire

Directions: With the X3/SF3/LW Unplugged. Download and Install this program. Once installed, there will be an Icon for the X3 LW Updater on you desktop.

NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.


	SCT X3/Livewire Updater IMPORTANT READ THIS: X3/Livewire Updater is the software used to do the following: Update the firmware on the X3/SF3/Livewire, Update the tune revision on the X3/SF3/Livewire, Load Custom Tunes onto the X3/SF3/Livewire, To Save a copy of the Stock File to your computer. To Load a Recovery Stock File onto the X3/SF3/Livewire Directions: With the X3/SF3/LW Unplugged. Download and Install this program. Once installed, there will be an Icon for the X3 LW Updater on you desktop. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.

IMPORTANT NOTICE FOR X3 & SF3's Sold Prior to July 25th, 2008: SCT has recently updated the firmware for all X3 & SF3 devices. These devices now have different firmware that will effect all future updates for your device. X3 devices part #3000 sold after July 25th, 2008 will now only be used for custom tuning and will no longer contain pre-loaded tunes. The SF3 device part #3015 will hold 3 custom tunes and will ship with pre-loaded tunes as in the past. If you have purchased an X3 device part #3000 or SF3 device part #3015 prior to July 25th, 2008, your device is now considered an SF3 device part #3015, even though the device stickers may state it is a part #3000. When updating your device with any future firmware or tune revisions, you must use the SF3 part #3015 device updates or you will receive an error when updating the device. Devices sold after July 25th, 2008 should use the matching firmware for the part number on the device sticker.


	OLD X3-3000's Firmware, Meaning Serial Number does NOT start with "XP". For X3's that Start with XP serial number, go to www.sctflash.com and download the latest firmware. IMPORTANT READ THIS: This firmware is ONLY for X3 Devices sold after July 25th, 2008. If you are updating an X3 device purchased prior to July 25th, 2008 then you must use the SF3 device updates or you will receive an error while updating the device. NEED HELP?! For help on everything you might need help on, visit our Help and How To's Page.


	IMPORTANT READ THIS: As of July 25th 2008 the X3 - 3000 has no Tune Revision. If you purchased your X3 before July 25th, 2008 then use the SF3's Downloads page.
	X3's are Custom Tune Only - Contact Me, or Order One Online.