JLT'S Cobra Jet Intake
We are now shipping the JLT Cobra Jet CAI designed for the 5.0L Coyote Engine with Cobra Jet Intake Manifold and Throttle Body. This cold air intake has been designed with a 110mm outlet, this is to fit the Cobra Jet Throttle Body.
Heat Shield The vacuum formed ABS plastic heat shield blocks engine heat at idle and low speed. It has a weather strip that seals to the hood, and incorporates the fresh air inlet from the grill. It uses a large area to make sure the filter has tons of cool air.
Molded in MAF It's a full 110mm ID at the MAF area.
Finish Options Standard finish is an OEM looking black textured plastic, also available with matching paint color finish (select before adding to cart).
Check out JLT's HydroCarbon Finish
Through a process called Hydrographics, the intake tube is made to look like carbon fiber. The tube is painted, then dipped in a water solution with a carbon fiber print film that adheres to the part when removed. Tube is then clear coated for a durable finish. Please allow up to 2 weeks for hydrocarbon orders to ship.
- JLT plastic intake tube
- Silicone Coupler
- 4.5x9 S&B powerstack air filter
- ABS Heat Shield
- PCV hose
- HD Clamps, all needed hardware
Air Filter Options OIL OR DRY? JLT uses air filters made by S&B to their exact specifications. For years they only used oiled filters, but dry filter technology has been proven and is now a popular option. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the dry filter or clean the oiled one.
Dry: Comparable airflow to oiled cotton filters with the same great protection. Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air.
Oil: Oiled filters can last forever as long as you properly clean and re-oil it. See picture of filters below. Oil filters are available in red or blue and Dry filters are white.
Tube and Filter Design The new JLT tube is 4.5" ID, roto molded plastic to resist engine heat and keep the intake air charge nice and cool. With no separate MAF housing or couplers air flow is fast and smooth. JLT chose the tapered flange design and Powerstack filtered ends of S&B's filters, which basically means you get a monster 4.5x9" filter. Finish it off with a silicone coupler and stainless clamps and you get the BEST Intake on the market! NO METAL TUBING HERE!
Easy Install The new design, detailed instructions and online video instructions helps make this an easy install.
Click Here For Instructions.
Water Blocker Included
All JLT kits now include their proprietary water blocker -- no worries about water getting into the filter.
MAINTENANCE To properly clean your oil filter, JLT recommends the S&B Precision II Cleaning & Oiling Kit. *TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.
Automatic Owners Automatic cars need an additional fitting, which we provide if you select automatic when ordering (see below). The fittings are Milled from solid billet aluminum and all you need to do is drill a hole (we show you where) in the tube, install the supplied grommet, fitting and you're done. Note, all kits sold to resellers will include the automatic fitting.