K&N 63-2594 Aircharger Air Intake for 2015 Ford Mustang 3.7L V6 | MPT Performance
Black Friday Sales Active // MPT phone and email support will be closed Nov 26 & 27 // Website is Open // Happy Thanksgiving
  1. Home
  2. Mustang
  3. K&N 63-2594 Aircharger Air Intake for 2015 Ford Mustang 3.7L V6

K&N 63-2594 Aircharger Air Intake for 2015 Ford Mustang 3.7L V6

Write a Review
$266.99
More air means more usable power and acceleration throughout the engine’s RPM range.
Part Number: kn63-2594
GTIN: 024844361615


K&N 63-2594 Aircharger Air Intake for 2015 Ford Mustang 3.7L V6



For the 2015 Ford Mustang, designers did their best to capture the spirit of Ford’s original Mustang by giving it iconic styling cues, and a great deal of exciting options. One of these choices was the 300-hp 3.7L V6, which offers budget-minded consumers the thrill of a Mustang, and the fuel economy of something more practical for daily driving. 300 horsepower is not something to laugh at. However, if you’re looking for performance like the V8, K&N can assist you in increasing the horsepower in your 3.7L Mustang by installing the K&N 63-2594 Performance Intake System.

An engine makes power by igniting a mixture of fuel and air inside the cylinders. The resulting explosion forces the piston down, which turns the crankshaft and sends power to the wheels. Introducing a massive amount of oxygen-rich cold air into the cylinders, causes the fuel to explode with superior force, and allows the engine to make more power using just about the same amount of fuel. The K&N 63-Series AirCharger Performance Intake System is engineered to supply your 2015 Mustang V6 engine with large amounts of cool air. This assists you in getting more of the things you want: horsepower, more torque, and faster throttle response.

K&N installed this air intake system on a 2015 Ford Mustang 3.7L, and their dyno-testing showed an estimated increase of 7.49 horsepower, and an additional 7.72 foot-pounds of torque. Of course, your individual results could vary due factors such as: the mileage, modifications, and condition of your specific car. However, just coming close to that number will definitely make a significant difference in the way your 2015 Mustang V6 performs.

To turn your Mustang into the thoroughbred you want, the K&N 63-Series AirCharger Performance Intake System does many things to help you reach that goal. First, it does away with the narrow, restricted factory intake for K&N intake tube with a wider diamete, which has been aerodynamically designed to straighten out the airflow path, and reduce turbulence. The K&N 2015 Ford Mustang 3.7L V6 air intake also has fittings for the factory EVAP and crank case vent lines, meaning no modifications required to make it fit your Mustang. Using just a few sockets, wrenches, and screwdrivers, you should be able to install this entire K&N performance kit in about 90 minutes. The photos in the detailed installation guide will walk you through each step.

The final and most important part of the K&N 63-Series AirCharger Air Intake System is the high-volume conical K&N air filter. It's mounted behind an air filter heat shield specifically designed for your Mustang to prevent the hot engine bay air from blending with the cooler air that's making its way into the system. This reusable cotton gauze air filter can capture dirt particles that are smaller in diameter than a human hair, and it can go for up to 100,000 miles between cleanings (depending on road conditions).

The K&N 63-Series AirCharger Performance Intake comes with a 10-Year/million mile limited warranty, and will not void the manufacturer’s factory warranty. But that's just the start, because K&N makes lots of other Mustang performance parts that are guaranteed to give your pony car a lot more giddy-up.

Features:
  • Guaranteed to Provide more HP
  • Estimated Horsepower Gain of 7.49HP @ 5401 RPM
  • Replaces stock air intake system
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Works with Original Equipment Manufacturer Computer Systems
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Specifications
  • Air Filter Color: Red
  • Air Filter Height: 5"
  • Air Filter Material: Cotton Gauze
  • Air Filter Outlet Shape: Round
  • Clamp Material: Stainless Steel
  • Clamp Style: Regular
  • Clamps Included: 5
  • Couplers Included: 2
  • Intake Pipe Color / Finish: None
  • Replacement Filter: RC-2960

Note: Horsepowergains based on similar vehicle dynamometer test. Results will vary.

Click Here for Installation Instructions