0 Items
AEM Induction Cold Air Intake for Ford F-150 2015-2018 2.7L and 2015-2016 3.5L Ecoboost

AEM Induction Cold Air Intake for Ford F-150 2015-2018 2.7L and 2015-2016 3.5L Ecoboost

Your Price:$297.99
Retail Price:$439.09
MPT Saves You:$141.10(32%)
Part Number:AEM21-8128DC


AEM Induction Cold Air Intake for Ford F-150 2015-2018 2.7L and 2015-2016 3.5L Ecoboost


AEM Part #: 21-8128DC



Do away with that restrictive factory air filter and intake housing and upgrade to the AEM Induction Cold Air Intake System!

Ford is deep into its 13th generation of the F150, and for this version of the top-selling truck in the US, 13 is definitely a lucky number. Ford didn't make any extravagant exterior styling changes to the F150, as they instead focused the majority of the new improvements out of plain sight. Steel body panels were replaced for strong, military-grade aluminum, reducing the F-150's weight by around 700lbs. Plus, the frame was also reinforced to give the F150 enhanced strength, and of course, all the technological upgrades any enthusiast could ever want.

The innovations didn't stop there. Ford went to work under the hood with massively strong and efficient twin-turbo Ecoboost V6 engines in either 2.7L or 3.5L. These turbocharged engines are great platforms, ripe for modifications like the 21-8128DC cold air intake system.

The 21-8128DC will give you a guaranteed improvement in horsepower on the 2015, 2016, 2017 and 2018 Ford F-150 2.7 liter turbo and the 2015 and 2016 3.5 liter turbo models. Its huge 3” inlet tube is the foundation of the 21-8128DC, as it streamlines the airflow into the turbochargers. The assembly has a tune for each turbocharger, and one oversized, dual-flange AEM 21-2138DK Dryflow air filter. The filter offers outstanding air filtration efficiency. To top it off, the filter is washable and reusable, without needing to be oiled, and can go for up to 100,000 miles between cleanings, depending on driving conditions. Plus, a heat shield defends the incoming air against radiant heat under the hood. The cooler the air the more dense the charge of air will be. That means more power for your F-150.

When put on a dyno, it is easy to see the gains you get from having a 21-8128DC installed. A 2015 Ford F-150 3.5 liter turbo equipped with the 21-8128DC air intake system produced an estimated additional 17 horsepower and 18 pound-feet of torque at 5200rpm more than what the vehicle gets with the OEM intake system installed. Power gains to the wheels... Now, that is what you want out of a cold air intake system!

The 21-8128DC is simple to install, comes with all parts needed for a proper installation, and works with all required factory connections. Knowing that this intake is backed by the AEM Lifetime Limited Warranty only adds more value to it. The results speak for themselves. Ford knows what they are doing with the F150 and show you do as well. Give your 2015 Ford F-150 2.7 liter turbo or 3.5 liter turbo a guaranteed increase in performance with the 21-8128DC Brute Force air intake system.

Specifications:
  • Estimated Horsepower Gain: 17 HP @ 5200 RPM
  • Air Filter Color: Red
  • Air Filter Material: Non-woven Synthetic
  • Air Filter Outlet Shape: Round
  • Air Filter Height: 8.188in (208 mm)
  • Replacement Filter: 21-2138DK
  • Intake Pipe Color / Finish: Gunmetal Gray
  • Intake Pipe Material: Aluminum
  • Carb EO Number: D-670-24 (2015-2016 F150 2.7L and 3.5L models only)
Click Here for Installation Instructions

Fits: 2015 2016 2017 2018 Ford F-150 2.7L Ecoboost and 2015 2016 Ford F-150 3.5L Ecoboost

Recently Viewed Items

Connect With Us
Sign Up & Get Deals
More Power Tuning PayPalMore Power Tuning VisaMore Power Tuning MastercardMore Power Tuning American ExpressMore Power Tuning Discover