2011-2012 F150 3.5L Ecoboost - AFE Power BladeRunner 3" Intercooler

$1,329.46

• Outflows the OE tube and fin core design by up to 20% while being 95% more efficient.
• Dual 2.25" billet aluminum inlets and a 3" outlet for superior strength and durability.

Questions about this item? Be the first to ask here.

Part Number: AFE-46-20121-1

UPC: 802959463710

Total

Questions? Call an MPT Expert at 1-407-636-7077

Product Info +
Customer Reviews +
Dyno Graphs +

Untitled Document

AFE Power BladeRunner 3" Intercooler

Tig-Welded End Tanks
3" Bar and Plate Core Design
CNC Machined Bypass Flange
Multi-Directional Vanes technology (MDV) Technology
Condensation Drain
Billet Aluminum Inlet/Outlets
Outflows Ford's tube-and-fin core design by up to 20%, while being 95% more efficient.
Dual 2.25" billet aluminum inlets and a 3" outlet for superior strength and durability.

Click Here to download installation instructions for this product.

The BladeRunner Intercooler is purpose-built for the Ford F150 Ecoboost 3.5L V6

It utilizes a 3" bar-and-plate core design that outflows Ford's tube and fin core design by up to 20% while being 95% more efficient. The 3/16" Tig-Welded end tanks and brackets provide superior strength and durability. aFe's Multi-directional Vanes Technology is incorporated for maximum cooling. AFe also addressed the OE intercooler water condensation issue through a CNC machined vent tube, which incorporates a brass 1/8" NPT breather vent. For those wishing not to use this feature, a solid NPT plug is also included.

Key Points from AFE Power:

Flow And Efficiency:
Flowing 20% better than the factory unit, the BladeRunner Intercooler performed above 95% efficiency, compared to the 88% efficiency of the factory intercooler. When tested on the field at an ambient temperature of 70 degrees Fahrenheit, the BladeRunner cooled outlet flow temperature to 77 degrees. Under the same conditions, the factory unit cooled outlet flow temperature to 91 degrees. The BladeRunner Intercooler is pressure test rated at 100psi which is perfect for high boost applications.

Condensation Drain:
The intercooler includes a 1/8" NPT brass breather vent, which drains condensation from the intercooler. The port can also be plugged using the included 1/8" NPT plug.

Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses dual 2.25" billet aluminum inlets and a 3" outlet for superior strength and durability.

Multi-Directional Vanes technology (MDV) Technology:
The BladeRunner MDV technology is used to direct hot airflow through the entire intercooler core allowing for increased air flow and cooling capacity.

Tig-Welded End Tanks:
The unique, BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates that incorporate four multi-directional vanes throughout the intercooler.