• Premium Customer Service
  • Fast Free Shipping
  • 200k+ Community
  1. Home
  2. F-150
  3. COBB Intercooler (Factory Location) for 2017-2020 Ford Ecoboost F-150 and Raptor
7F1527-BK
7F1527-BK
MPT Elite Discount Deal
On Sale $ Off

COBB Intercooler (Factory Location) for 2017-2020 Ford Ecoboost F-150 and Raptor

Write a Review
$1,050.00

• Available in black or silver
• ~70% larger volume than stock intercooler core and cooling surface area 10% larger than stock
• Cast aluminum TIG welded assembly
• No cutting, trimming, or permanent modification to the vehicle required
Part Number: COBB-7F1527
UPC: 700424678693
Has no adverse effect on emissions, consistent with the EPA Tampering Policy (2019). CARB EO: D-660-19

Options to Consider

*
Questions? Call an MPT Expert at 1-407-636-7077

COBB Intercooler (Factory Location) for 2017-2020 Ford 2.7L / 3.5L Ecoboost F-150 and Raptor

COBB Part #:
  • 7F1527-SL - Silver
  • 7F1527-BK - Black


Fits:
  • 2018 2019 2020 Ford F150 2.7L Ecoboost V6
  • 2017 2018 2019 2020 Ford F150 3.5L Ecoboost V6
  • 2019 2020 Ford F150 Limited 3.5L High Output Ecoboost V6
  • 2017 2018 2019 2020 Ford Raptor 3.5L High Output Ecoboost V6

Whether you wish to go all out with the massive COBB Front Mount Intercooler (light modification for install required) or the easy installation of this factory location front mount intercooler, COBB has you and your 2017, 2018, 2019, or 2020 Ecoboost covered! This cast aluminum, TIG welded assembly has a core with 70% greater volume than the stock unit and provides an additional 10% of cooling surface area. All while mating snugly to the OEM shutter shroud requiring zer cutting, trimming, or permanent modification to the vehicle. This FMIC was engineered in house with attention to detail lacking on other aftermarket offerings. Computational fluid dynamic analysis was used to create the smoothest end tank design which increases flow evenly and resulted in no areas of significant turbulence. The outlet port of the intercooler was also designed with a large chamfer to provide a smooth transition out of the intercooler into the throttle body tube to further reduce turbulence in the system. For those planning additional modifications like water or methanol injection, this intercooler also has two flat sections into the casting. The top flat can easily be drilled and tapped to introduce a nozzle. The bottom flat can be used as a drain port.

Features:
  • Available in black or silver
  • ~70% larger volume than stock intercooler core and cooling surface area 10% larger than stock
  • Cast aluminum TIG welded assembly
  • No cutting, trimming, or permanent modification to the vehicle required
  • Mates up snugly to OEM shutter shroud to funnel air through ambient side fins like OEM

Recommended Upgrades

Sale $5.00
Normally $8.00 Sale
Not for Sale
Sale $13.50
Normally $15.00 Sale
(10)
Sale $13.50
Normally $15.00 Sale
Sale $15.00
Normally $25.00 Sale
(2)
Sale $25.00
Normally $30.00 Sale
(1)