CR Performance Manifold Set 2017-20 Ford Raptor / F-150 3.5L Ecoboost
  1. Home
  2. F-150
  3. CR Performance Full Bore Upgrade Manifold Set for 2017-2020 Ford Raptor / F-150 3.5L Ecoboost
MPT Elite Discount Deal
On Sale % Off

CR Performance Full Bore Upgrade Manifold Set for 2017-2020 Ford Raptor / F-150 3.5L Ecoboost

Write a Review
$589.99
Retail Price:$699.99
MPT Saves You:$110.00(16%)
• 30% more flow area over stock with no restriction
• Ready to support over 800 HP of flow
• 3-5 lbs/min flow increase
• Quicker spool times
• Efficient D porting geometry
• Thick wall durable High Sil Steel
Part Number: CRP-5 001 17X

Options to Consider

*

What Customers have to say - Click here to READ REVIEWS ★★★★★


CR Performance Full Bore Upgrade Manifold Set for 2017-2020 Ford Raptor / F-150 3.5L Ecoboost

CR Performance Part #:
  • 5 001 17X - 2017-2020 Ford F150 3.5L Ecoboost / 2018-2020 Ford Expedition 3.5L Ecoboost
  • 5 001 17X-R - 2017-2020 Ford Raptor 3.5L Ecoboost

Unleash your Ecoboost's Full Potential with CR Performance's Full Bore 3.5L V6 EcoBoost Performance Manifolds

Features:
  • High performance, larger runners offer 30% more flow area over stock with no restriction throughout the RPM range
  • Ready to support over 800 HP of flow
  • 3-5 lbs/min flow increase typical on performance use and greater gains with upgraded turbos
  • Quicker spool times
  • Removes restriction of cylinders with efficient D porting geometry
  • Port matched to turbocharger turbine housing (Unlike OEM Manifolds)
  • Thick wall durable High Sil Steel resists warping without cracking
  • Dyno proven gains on completely stock truck with no tune of 23 RWHP 32 RW lb-ft peak with massive area under the curve at 368 RWHP & 428 ft-lbs
  • Users can expect exponential increased gains when matched with other performance products that push flow past the stock manifold abilities or in combination with tuning
What's Included:
  • 1x Performance Drivers Side Manifold
  • 1x Performance Passenger Side Manifold
  • 16x W712244-S300 / W719078-S900 – Manifold Stud F150 3.5L
  • 16x W701706-S440 – Grade 10 Locking Manifold Nut
  • 1x Install Manual

Click Here for Installation Instructions

Professional installation is highly recommended with this modification.

Ford OEM Manifold Part #:
  • HL3Z-9431-A, JL3Z-9431-C, JL7Z-9431-C
  • HL3Z-9430-A, JL3Z-9430-C, JL7Z-9430-B
OEM Gaskets and Required hardware:
  • 1x HL7Z-9448-B 2017-2020 DS F150 3.5L Manifold Gasket (L / Driver's Side)
    1x HL7Z-9448-A 2011-2020 PS F150 3.5L Manifold Gasket (R / Passenger Side)
  • 2x HL3Z-9T516-A 2017+ F150 3.5L Turbocharger Oil Inlet Feed Seal
    2x FT4Z-6N652-E 2017+ F150 3.5L Turbocharger Oil Drain Seal #1
    2x HL3Z-00815-A 2017+ F150 3.5L Turbocharger Oil Drain Seal #2
  • 6x FT4Z-6N652-D 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #1
    4x HL3Z-6N652-A 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #2
  • 6x W715673-S900 2017+ Turbocharger Mounting Bolt F150 3.5L & Raptor
    4x W520514-S440 2017+ Downpipe Nut F150 3.5L (Recommended)
Required Only if the Downpipe Adaptor is Separated / New Turbochargers are Installed:
  • 2x BL3Z-9450-A 2017+ F150 3.5L Down Pipe Gasket
  • 4x W716667-S900 2017+ Downpipe Stud F150 3.5L
2017 F-150 / Raptor Requirements:
  • 1x HL3Z-9448-C 2017 F150 3.5L Turbo Turbine Inlet Gasket (L / Driver's Side)
    1x HL3Z-9450-A 2017 F150 3.5L Turbo Turbine Inlet Gasket (R / Passenger's Side)
2018-2020 F150 / Raptor Requirements:
  • 2x JL3Z-9450-A 2018+ F150 3.5L Turbo Turbine Inlet Gasket (L / Driver's Side) & (R / Passenger's Side)

Recommended Upgrades

Sale $5.00
Normally $8.00 Sale
Sale $8.00
Normally $10.00 Sale
(9)
Sale $8.00
Normally $10.00 Sale
Sale $20.00
Normally $25.00 Sale
(1)
Sale $20.00
Normally $30.00 Sale