Set of 2 Caltrac Traction Bars

Caltracs Traction bars for 2015-2019 F150 and Raptor

2 Review(s) Write a Review

$469.00

Improve traction and achieve better 60ft. times - Adjustable - Easy Install

Questions about this item? Ask here.

Part Number: CRS-731

Does the vehicle have a flip kit? *

Select Vehicle *

Total

Questions? Call an MPT Expert at 1-407-636-7077

Product Info +
Customer Reviews +
Questions and Answers +

Calvert Racing Suspensions' Caltrac Traction Bar kit for 2015-2019 Ford F150 and Raptor

Fitment Info

Fits stock F150 rear end
2015-2018 F150/Raptor
V8 5.0L Coyote, V6 Twin Turbo 3.5L Ecoboost, and V6 Twin Turbo 2.7L Ecoboost
Built for stock shock location, standard length bar.

For over two decades, Calvert Racing Suspension has been a part of putting power to the ground through their extensive history with leafspring enhancements including these traction bars. These Caltrac traction bars for the 2015-2019 Ford F150 and Raptor trucks are widely-used for drag racing applications. This is due to their ability to Improve 60 ft times, overall track times, keep wheels planted by preventing axle rotation, and eliminating spring wrap-up.

Other great features of this Caltrac set:

Installation is completely bolt-on, no need to modify the stock suspension.
Fully adjustable to suit any track conditions
Powdercoated a Gloss Black finish.
Full color installation guide
Caltrac Traction bars are PSCA, NMCA and NHRA approved.

Q: Hello. I was interested in buying the traction bars but am wondering why its an extra $50 if I dont have a flip kit. Also if I plan to drop my truck in the future will having the traction bars affect it. Thanks.

Asked by: Javier Gutierrez - 1/6/2021

A: Non lowered vehicles require additional hardware to make these bars fit properly, that is why you see the extra charge. When you lower the truck you will be able to keep these bars but will need to remove the flip kit.

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Kyle Parker (1/6/2021)

Q: Will they work with a 3 inch lift?

Asked by: Idcjeff - 11/3/2020

A: This set of CalTracks bars are set up to work with stock height F150's or lowered F150's with the optional Flip Kit. CalTracks are available for raised F150's, it just takes some additional measurements to make sure you get the correct parts. You can contact us for more information about these parts at 407-636-7077.

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Kyle Parker (11/3/2020)

Q: Will they fit a 2019 f150 4x4 xlt with a 6 inch BDS lift?

Asked by: Ismael Colon - 4/7/2022

A: For lifted applications, we can gather additional measurements from you and relay that to Calvert Racing. Just mention it during checkout and we'll have you fill out a sheet from them.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: JR Rodriguez (4/8/2022)

Q: Are these in stock right now?

Asked by: Edgar Gutierrez - 8/31/2021

A: We do not stock them at our location. However, I spoke to Calvert and they stated they are in stock.