Improve the performance of your 2015-2020 EcoBoost F-150 or Raptor by replacing the small, inefficient stock intercooler to reduce heat and produce more power. This intercooler is a direct fit replacement that features a core over 50% larger than the stock unit. The CVF Titan Intercooler saw Charge Air Temperature (CAC) a rise only +2 degrees over ambient temperature compared to the OEM intercooler's +42 CAC rise during a 2-5 gear pull under similar conditions (the OEM test was even conducted at cooler temperatures to start!). The Titan realized a whopping 40 degree improvement over the OEM intercooler in real-world street testing by an unbiased, third-party tester where it matters: on the street, and not at the dyno (note: runs were made 1.5 hours apart on the same day). Manufactured from top-grade aluminum, the CVF Titan Intercooler features a TIG-welded bar-and-plate design for maximum durability and fully cast end tanks to ensure maximum flow of air into the unit and out to your turbo - equaling more HP. This intercooler is specifically designed to fit both the 2015+ EcoBoost F-150 2.7L, 3.5L, and Raptor models. There is no modification required to install the intercooler. Plus, this intercooler in compatible with both the Turbosmart TS-0215-1371 and Turbosmart TS-0225-1001 blow off valves!
The Aluminum Intercooler Hot-side + Cold-side Piping Kit is designed to improve the performance of your EcoBoost F-150's turbos by improving the performance of your intercooler via a 15% increase in airflow over the OEM alternative. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow. The 3.5" to 3" cold-side and 2" to 2.5" hot-side piping feature mandrel bends to allow for smooth air flow and the ultra-resistance fibers on the silicone couplers offer enhanced tolerance against heat and pressure. The hot-side piping also features a CNC-machined NPT bung that allows for quick installation of water/meth injection or a boost gauge. Designed to install easily with basic hand tools, this Piping Kit requires no extra modifications and should only take you about 90 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.
Select a row below to filter reviews.
5.0