JMS PowerMAX V2 FuelMAX - Plug & Play for 2011-2014 Ford Mustang GT / V6 - Single Pump
JMS Part #: P2000PPM11
The JMS PowerMAX V2 aka FuelMAX V2 Fuel Pump Voltage Booster features exclusive JMS digital technology and is designed to provide up to an 85% increase in fuel delivery. The revised voltage booster is pre-engineered for use on 2011, 2012, 2013, and 2014 models of the Mustang GT with the 5.0L V8 and Mustang with the 3.7L V6.
Why JMS Fuel Max:
- Simple Plug and Play installation.
- Designed to be enabled via the Accelerator Pedal Position Sensor (Plug & Play)
- Adjustable voltage Ramp In Ramp Out to eliminate fuel pressure spikes
- Compatible with all 12V or 16V battery systems
- Green LED to confirm unit is working
The JMS PowerMAX FuelMAX V2, PM-2000-PPM11, provides the highest continuous voltage and amperage output without noise, and is available in true 40-amp and 80-amp input fuse configurations. Another industry first includes the ability to choose how to enable the units voltage-boosting output. Two versions are available; one version activates the device via a built-in internal boost pressure sensor (1-29psi), and the other activates the boosted output via a Ground or a monitored 1-5-volt external signal (MAP, TPS or PPS sensor signal). The new device activation options allow you to choose the device that works best for your specific vehicle installation.
The recently updated PowerMAX FuelMAX V2, PM 2000 PPM11, has a proprietary enclosure and industrial heat-sink, featuring 10 gauge heavy-duty wiring and either 40 or 80 amp fuses along with a host of innovative features to further improve the user experience. The maximum output voltage range is user selectable (18.5 or 22 volts) and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly.
JMS is the only company to offer user-adjustable voltage ramp in and ramp out rates. This feature allows the user to correct and eliminate fuel pressure spikes that occur when fuel pump voltage is rapidly increased or decreased. You now have maximum control over the voltage ramp-in and ramp-out rate and depending on model, voltage can be controlled via time or boost pressure or it can be controlled via time or monitored voltage, and it's easy to setup via simple to use knobs and switches.
JMS FuelMAX V2 Fuel Pump Voltage Booster Kits are shipped complete with everything you need for installation.
Click Here for Installation Instructions
JMS PowerMax V2 - FuelMax Installation Kit:
1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 1 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6 - Zip Ties, 6 - Self drilling hex screws, mini screw-driver