JMS PowerMAX V2 - SparkMAX - Universal Splice In Ignition Booster
JMS Part # P2100
Double the output of your ignition system with a PowerMAX V2 SparkMAX! The SparkMAX will increase the output of your coil-on-plug ignition system or any ignition system. It eliminates spark plug blow out, while allowing you to use a wider gap on your spark plugs for smoother acceleration and enhanced economy. It is simple to install, as it splices into your existing ignition coil +12V DC feed wire and is compatible with all 12V and 16V battery systems.
Features:
- High Quality User Adjustable Hobbs Switch: Preset @ 5psi, User Adjustable from 3psi to 7psi
- Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor
- Green Status LED: Know at a glance what the unit is doing. (Blinking LED = Boosting Voltage)
- Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.
- When not boosting output voltage, the voltage drop across the unit is only 0.05V
- Maximum coltage output is 25V (adjustable output)
Each PowerMAX V2 - SparkMAX kit contains: 44 Amp PowerMAX V2 Voltage Booster, Wiring Harness, Installation Kit, Set of Instructions
Installation kit contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 1 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6 - Zip Ties, 6 - Self drilling hex screws, mini screw-driver
