Mishimoto Intercooler Pipe Boot Kit 2019+ Ranger 2.3L Ecoboost
  1. Home
  2. Ecoboost
  3. Mishimoto Intercooler Pipe and Boot Kit for 2019+ Ford Ranger 2.3L Ecoboost
MMICP-RGR-19KP
MMICP-RGR-19KP

Mishimoto Intercooler Pipe and Boot Kit for 2019+ Ford Ranger 2.3L Ecoboost

Write a Review
$399.95
• Direct-fit for 2019-2020 Ford Ranger 2.3L EcoBoost
• Improves flow by 25.6% on the hot side / 16.6% on the cold side
• Increases internal volume by 26.4% on the hot side / 13.7% on the cold side
• Available in Polished or Black
Part Number: MMICP-RGR-19K

Options to Consider

*
*

What Customer's have to say - Click here to READ REVIEWS ★★★★★


Mishimoto Intercooler Pipe and Boot Kit for 2019+ Ford Ranger 2.3L Ecoboost

Mishimoto Part #:
  • MMICP-RGR-19KP - Polished
  • MMICP-RGR-19KMWBK - Micro-Wrinkle Black

The 2019 and 2020 Ford Ranger 2.3L EcoBoost is one of the most adept small trucks available. With the Ranger's direct-injected and turbocharged engine providing 310 lb-ft of torque, the 2019-2020 Ranger is a combination of efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger generates plenty of power to let you cut loose, but what if you're not satisfied and craving extra power? The addition of a tune and more boost is a fantastic way to produce more power from the Ranger, but the stock intercooler pipes have a limit when it comes to boost. That’s where Mishimoto steps in with their development of this aluminum intercooler pipe and boot kit for the 2019+ Ford Ranger 2.3L EcoBoost. Mishimoto's all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25% better flow and power potential. The Mishimoto intercooler pipes are also larger than stock, with a 19.86% increase in volume to let your turbo breathe easy. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto high-torque worm gear clamps for consistent holding power. Like all their Ranger products, this 2019+ Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by their Mishimoto Lifetime Warranty.

Features:
  • Direct-fit for 2019-2020 Ford Ranger 2.3L EcoBoost
  • Improves flow by 25.6% on the hot side and 16.6% on the cold side
  • Increases internal volume by 26.4% on the hot side and 13.7% on the cold side for more power potential
  • Mandrel-bent aluminum pipes eliminate restrictive bends
  • Cold-side pipe includes bung that can be drilled and tapped for a sensor or boost gauge
  • Includes Mishimoto Silicone Boots with DuraCore™ Technology
  • Available in polished or micro-wrinkle black powder-coated finish



Includes:
  • 1x - Aluminum Hot-Side Intercooler Pipe
  • 1x - Aluminum Cold-Side Intercooler Pipe
  • 1x - CNC-Machined Aluminum Hot-side Pipe Adapter
  • 2x - DuraCore™ Hot-Side Couplers
  • 1x - DuraCore™ Cold-Side Coupler
  • 6x - High-Torque Worm Gear Clamps
  • Bypass Valve Mounting Hardware
  • Mishimoto Lifetime Warranty
NOTE: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).