UPR 2021 Ford Bronco 2.7L Ecoboost Plug N Play Catch Can

UPR Part number:

• 5030-274 - Satin
• 5030-274-1 - Black

• 6oz Capacity
• Show Quality Finish
• Can measures 2.5" x 6"
• Prevents oil from entering intake
• Exclusive 4 chamber design traps oil
• High quality CNC machined billet aluminum
• Innovative Diffuser Tube and Chamber
• UPR Plug N Play fittings
• 5/8" Oil Resistant, Continental Braided Hoses included
• Available in Satin or Black - Select Finish Above
• Installs in 10 minutes

UPR Plug N Play ™ catch can kit is the perfect fit for your Bronco 2.7L Ecoboost! Super easy install! Easy to service too with UPR's Billet bracket technology and Plug N Play quick release factory style fittings. You can remove this kit to return the vehicle back to stock in just minutes if needed. With its extremely efficient compact design and incredible looks, UPR went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the strongest and best performing setup possible. There's no cheap stock lines here that have been cut and spliced on or hardware store rubber hose! Featuring the UPR Plug N Play Catch Can Fittings, you can empty the can without removing the intake cover or catch can lines from your engine. (UPR Exclusive Push Button Fittings) UPR has hundreds of hours testing their new Multi-Stage Oil Separator to ensure proven results will exceed your expectations. 4 ounces will give you the needed oil capacity to be sure the catch can does not overfill.

This patented design is the most advanced Internal function from coalescing to condensing every aspect was engineered properly. It cannot be compared or confused with units that have side by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. UPR makes sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR's Patented Multi-chamber diffuser technology is featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

Every UPR Catch Can is designed, tested and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. UPR is continually improving their designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. They are so confident in their product that they offer an unconditional warranty on their products to let you know you can always count on UPR products. UPR does not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.

UPR Billet One-Way Valve Cover Breather:
This is a Valve Cover Breather with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.

UPR SS Magnetic Drain Plug:
The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.

UPR Catch Can Drain Line Kit:
The drain line kit includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area.

Here's an example of what was caught by UPR Catch Can: